x
Send Your Inquiry Today
Quick Quote

Types of Stainless Steel: Grades, Properties & How to Choose for CNC Machining

Picking the wrong stainless steel grade for your CNC part can lead to corrosion failure, excessive tool wear, longer machining time, and unnecessary cost overruns. This article will introduce five main types of stainless steel and compare the performance and machining characteristics of common grades to help you choose a more suitable stainless steel for CNC machining parts.

What Are the Main Types of Stainless Steel?

Based on the microstructure, stainless steel is typically classified into five main types. For CNC machining, the practical differences among these five types are their corrosion resistance, strength, hardness, wear resistance, and machinability. 

Shanghai Yecheng Different Types of Stainess Steel

Austenitic Stainless Steel

Austenitic stainless steel is a common type of CNC stainless steel parts. Common grades include 304, 304L, 316, and 316L. It usually has good corrosion resistance, toughness, and welding performance, and is suitable for a large number of general industrial parts.

Main properties:

  • Excellent to good corrosion resistance
  • Good toughness
  • Good welding performance
  • Non-magnetic or weakly magnetic in the annealed state
  • Medium machinability

304 vs 316 Stainless Steel

If your part requires good corrosion resistance and toughness, but does not have particularly high hardness or strength requirements, 304 is usually a reasonable starting point. If the part needs to withstand seawater, chloride, or more severe corrosive environments, then 316/316L can be further considered.

316 provides additional corrosion resistance, but you should only pay for that advantage when your application actually needs it.

Ferritic Stainless Steel

Ferritic stainless steel mainly incorporates chromium as one of its alloying elements. Compared with many austenitic stainless steels, it usually offers medium corrosion resistance at a lower cost. The main stainless steel grades include 430.

Main properties:

  • Medium corrosion resistance
  • Good oxidation resistance
  • Generally has better machinability
  • Lower nickel content compared to common austenitic stainless steel
  • Less toughness than austenitic stainless steel

If your part requires certain corrosion resistance but the working environment is not very demanding, and you also want to control the material cost, 430 can be a candidate material. It is not a simple substitute for 304. The actual choice should depend on the specific requirements of your part for corrosion resistance, toughness, and cost. If the part is subjected to large mechanical loads or requires higher toughness, further evaluation of 304 or other more suitable grades should be conducted.

Martensitic Stainless Steel

When hardness, strength, and wear resistance are more important than the highest level of corrosion resistance, martensitic stainless steel is a more suitable choice. Common types include 410, 420, and 440C.

Main properties:

  • The hardness is usually higher than that of austenitic stainless steel.
  • Good strength
  • Good wear resistance
  • It can usually be heat-treated
  • Corrosion resistance varies depending on the specific grade

If your part needs good wear resistance, high surface hardness, or higher mechanical strength, martensitic stainless steel can be considered. For example, 420 can be used for wear-resistant parts, and when the part requires very high hardness, 440C can be considered.

Duplex Stainless Steel

Duplex stainless steel combines austenitic and ferritic structures, providing a good balance between strength and corrosion resistance. 2205 is a common grade.

Main properties:

  • High strength
  • Excellent corrosion resistance
  • Good resistance to chloride corrosion
  • Strength is higher than that of many conventional austenitic stainless steels
  • More difficult to process than the common 304

If your part only requires ordinary corrosion resistance, 304 or 316 might be sufficient. Only when the part truly needs higher strength or specific performance in a particular corrosive environment does the advantage of 2205 become more meaningful.

Precipitation Hardening (PH) Stainless Steel

Precipitation-hardening stainless steel achieves high strength through heat treatment. The common grade is 17-4 PH.

Main properties:

  • High strength
  • After proper heat treatment, it has high hardness
  • Good corrosion resistance
  • Suitable for parts with high requirements for size and mechanical properties
  • Machinability depends on the material heat-treatment condition 

When your parts need significantly higher strength than 304 or 316, while still requiring certain corrosion resistance, 17-4 PH is a worthy consideration. It is usually used in precision industrial parts and CNC aerospace parts.

Common Stainless Steel Grades for Engineering Applications

If you are designing CNC stainless steel parts, you can quickly narrow down the material range by the following method:

GradeTypeKey AdvantageCorrosion ResistanceMachinabilityTypical Applications
304AusteniticGeneral-purposeHighModerateGeneral CNC parts
316/316LAusteniticCorrosion resistanceVery HighModerateCNC boat parts, medical, chemical
430FerriticCost-effective corrosion resistanceModerateGoodIndustrial / consumer
410MartensiticStrength & wear resistanceModerateModerate to Good Shafts, components
420MartensiticHardnessModerateModerateWear-resistant parts
440CMartensiticVery high hardnessModerateDifficultBearings, precision components
17-4 PHPHHigh strengthHighModerateAerospace, industrial
2205DuplexStrength + corrosion resistanceVery HighDifficultMarine, chemical

How to Choose the Right Stainless Steel for Your Part

Corrosion Resistance

First, you need to determine the environment in which your product or component is used. If the part is exposed to seawater, chlorides, salt spray, or other corrosive environments, 316/316L may be more appropriate than 304. 

Strength

Don’t choose a high-strength material first and then make the design adapt to it. Instead, you should first determine exactly how much strength the part really needs. If the part is subjected to significant mechanical loads, you need to take a closer look at:

  • Tensile strength
  • Yield strength
  • Fatigue requirements
  • Safety factor

If the strength of 304/316 is insufficient, then consider using 17-4 PH, 2205, or other high-strength materials.

Hardness

If your stainless steel parts have friction, sliding, impact, and contact wear, you cannot only consider the corrosion resistance of the material. At this time, you can consider martensitic stainless steels such as 410, 420, and 440C.

If you need higher hardness, you also need to consider the part condition after subsequent heat treatment. You cannot simply rely on the hardness of the material.

Wear Resistance

For an axle sleeve or mechanical part that requires long-term sliding contact, even if 304 has excellent corrosion resistance, it does not mean that it is the best material. Such designs should take into account the hardness of the material, the fit relationship, surface roughness, and lubrication conditions.

Machinability

The machinability varies greatly among different types of stainless steel.

  • 304 and 316 are prone to work hardening during machining. 
  • 2205 has high strength and thus a higher processing difficulty.
  • 440C is more difficult to process under high hardness conditions.
  • The machining performance of 17-4 PH is related to the heat treatment state.

If your design requires a large number of deep cavities, thin walls, small holes, or complex contours, this point is particularly worth considering during the design stage.

Shanghai Yecheng Stainless Steel Turning Parts

Operating Temperature

If the parts are used in high-temperature, low-temperature, or environments with significant temperature variations, you need to further verify the mechanical properties and corrosion resistance of the material at the actual working temperatures.

Cost

Material costs are only a part of the production costs. However, the total cost of a CNC part also includes machining, tooling, heat treatment, surface finishing, and other production costs. 

The raw material costs of different stainless steels may be similar, but due to the long processing time, large consumption of tools, or the need for additional heat treatment, the final part cost may increase significantly.

FAQ

What Are the Different Standards for Stainless Steel Grades?

Stainless steel may be labeled according to various standards such as ASTM, AISI, UNS, EN, DIN, JIS, etc. The labeling standards in different countries may vary, so when purchasing CNC parts, you should definitely confirm the specific grade and corresponding standard rather than simply judging based on the material name. Avoid having your processor misunderstand your material.

Which Stainless Steel Is Best for CNC Machining?

There is no such thing as the “best” stainless steel material; there are only those that are most suitable for you. All of this depends on your applications. For CNC parts, the most important thing is to align these properties with the actual working conditions of the parts. 

The best material should be one that meets the design requirements, is cost-effective during machining, and is also reasonable in terms of cost.

Shanghai Yecheng Stainless Steels Grades Parts

How Can I Tell if My Stainless Steel Is 304 or 316?

You can’t simply judge which part is 304 and which is 316 by looking at its appearance. You can ask your supplier to prepare the material report when delivering the goods.

What Is the Cheapest Stainless Steel Grade?

430 and some 400 series stainless steels can often be chosen as a cost-sensitive option, but the actual cost also depends on the material specifications, suppliers, purchase quantity, and processing difficulty. 

However, if the overall processing cost is taken into consideration, additional factors such as processing costs and surface treatment costs should also be considered.

Does Stainless Steel Require Deburring or Post-Surface Treatment After CNC Machining?

Yes. The stainless steel parts machined by CNC usually need deburring and cleaning. If your parts have high requirements for corrosion resistance and surface cleanliness, passivation treatment can be carried out further. In addition, you can also consider black oxide on the stainless steel according to your applications.

Stainless Steel CNC Machining Parts

Final Thoughts

Different stainless steel types offer different combinations of corrosion resistance, strength, hardness, wear resistance, and machinability. For CNC machining, the right choice depends not only on the material properties but also on your part design and production requirements.

If you are unsure whether a stainless steel type or grade is suitable for your part, send us your drawings. Shanghai Yecheng can review the material and machining requirements and provide DFM feedback before production.

 

Scroll to Top